FS02 Face shield manufacturer takes you to understand the structure of the face shields
Release time:
2024-03-27
1. Cap body. The FS02 Face shield manufacturer tells you that the body of the face shield is located in front of it and has a wider brim. 2. Fixing holes. The FS02 Face shield manufacturer tells you that there are no fixing holes on both sides of the cap body of the mask, and there are circular teeth on the periphery of the fixing holes.
1. Cap body. The FS02 Face shield manufacturer tells you that the body of the face shield is located in front of it and has a wider brim.
2. Fixing holes. The FS02 Face shield manufacturer tells you that there are no fixing holes on both sides of the cap body of the mask, and there are circular teeth on the periphery of the fixing holes.
(1) Head ring. The FS02 Face shield manufacturer tells you that the headband of the mask is centrally positioned for comfort on the head.
(2) Fixed piece. The FS02 Face shield manufacturer tells you that the end of the fixing piece of the mask is provided with a buckling portion that can be twisted forward, the buckling portion is provided with a protruding point, and the fixing piece is provided with a groove corresponding to the protruding point.
(3) Earmuffs. The FS02 Face shield manufacturer tells you that the earmuffs of the mask are fixed to the support frame, and there is a chute on the top edge of the earmuff, and a positioning slot in the Breathable perforations underneath.
The above information is the FS02 Face shield manufacturer's introduction and analysis of the structure of the face shields, hope it helps you.
Related News
Contact Us
sales director：Gary Wang
No.218, Liuguanli Road, Dipu Sub-district, Anji County, 313300 Zhejiang, P.R. China
Copyright © Anji HengFeng Sanitary Material Co.,Ltd Rights Reserved.